漏粪板模具是以全新原料工程聚丙烯8303注塑而成,该材质具有强度高,韧性好,耐摩擦,耐腐蚀,等优点,使用寿命均在3年(1000次)以上,有效降低了客户的生产成本。
The fecal leakage plate mold is made of new raw material engineering polypropylene 8303. The material has the advantages of high strength, good toughness, friction resistance, corrosion resistance, etc. the service life is more than 3 years (1000 times), which effectively reduces the production cost of customers.
漏粪板模具优点
Advantages of fecal leakage plate die
1,采用单模设计,脱模方便,快捷。(使用时不易产生裂纹,不破损,使用寿命长)。
1. Single mode design is adopted, which is convenient and fast for demoulding. (it is not easy to crack, damage and long service life).
2,此模具比老式的漏粪板模具少了几排孔,降低了钢筋数量从而减少了制作成本。
2. This mold has fewer rows of holes than the old fecal leakage plate mold, which reduces the number of reinforcement and reduces the manufacturing cost.
3,漏粪孔之间的距离加大,加强了水泥漏粪板的承重量。
3. The distance between fecal leakage holes is increased, which strengthens the bearing capacity of cement fecal leakage plate.
4,加大了漏粪孔的倾流水槽钢模具 不锈钢铸件 扭王字块模具 井盖钢模具 标志桩模具 调匝式消弧线圈 风冷控制柜 烤漆龙骨斜角度,从而脱模更加顺畅,只需两个人抬着,反扣过来即可脱出。
4. The inclination angle of the fecal leakage hole is increased, so that the demoulding is more smooth. It only needs two people to lift it and buckle it back.
5,以往的漏粪板拼到一起,连接地方会有缝隙,而欧式漏粪板两边均为一半宽度的孔,可以拼接在一起,组成一个完整的漏粪孔,不仅美观还提高了漏粪效率。
5. When the previous fecal leakage plates are assembled together, there will be gaps at the connection place. However, both sides of the European fecal leakage plate are holes with half width, which can be spliced together to form a complete fecal leakage hole, which is not only beautiful, but also improves the fecal leakage efficiency.